La description

Type 635 DIN electromechanical totalizing counter has a 6-digit optical display and is equipped with DIN rail fitting. The device can operate across a broad range of voltage, which enables it to run on 5, 12 and 24 volts DC and 115 or 230 volts AC. The counter is connected up using screw terminals.
  • DIN rail fitting
  • Wide range of voltages
  • Screw terminals
  • No reset
Product Family635 DIN
FunctionTotalizing counter
TechnologyElectromechanical
Digits
  • 6-digit
  • 7-digit
Display
  • 6-digit
  • 7-digit
Presetnone
Digit Height [mm]4 mm (0.2 in), visual
Voltage
  • 5 VDC
  • 24-230 VAC/DC
Resetwithout reset
Duty Cycle at 25 °C100 %
Power Consumption
  • at 5 VDC: 80 mW
  • at 12 VDC: 200 mW
  • at 24 VDC: 400 mW
  • at 24 VAC: 85 mW
  • at 115 VAC / VDC: 350 mW
  • at 230 VAC / VDC: 665 mW
Cable Cross-Sectionmax. 2.5 mm2 (0.0039 in2)
Pulse Length min.50 ms
Residual Ripple [%]DC mode: 48 %
Supply Voltage
  • 5, 12 and 24 VDC
  • 24 VAC
  • 115/230 VDC / VAC
Count Frequency [Hz]10 Hz
Count Inputadding
Pulse Duty Factor Count Impulse1:1
Electrical ConnectionScrew terminals max. 2.5 mm? (0.0039 in2)
Maintenance-Free operation10? pulses
Product Family635 DIN
FunctionTotalizing counter
TechnologyElectromechanical
Digits
  • 6-digit
  • 7-digit
Display
  • 6-digit
  • 7-digit
Presetnone
Digit Height [mm]4 mm (0.2 in), visual
Voltage
  • 5 VDC
  • 24-230 VAC/DC
Resetwithout reset
Duty Cycle at 25 °C100 %
Power Consumption
  • at 5 VDC: 80 mW
  • at 12 VDC: 200 mW
  • at 24 VDC: 400 mW
  • at 24 VAC: 85 mW
  • at 115 VAC / VDC: 350 mW
  • at 230 VAC / VDC: 665 mW
Cable Cross-Sectionmax. 2.5 mm2 (0.0039 in2)
Pulse Length min.50 ms
Residual Ripple [%]DC mode: 48 %
Supply Voltage
  • 5, 12 and 24 VDC
  • 24 VAC
  • 115/230 VDC / VAC
Count Frequency [Hz]10 Hz
Count Inputadding
Pulse Duty Factor Count Impulse1:1
Electrical ConnectionScrew terminals max. 2.5 mm? (0.0039 in2)
Maintenance-Free operation10? pulses
''